Plant & Control Instruments

Plant & Control Instrumentation for all industry applications.

Plant & Control Instruments

Plant & Control Instrumentation for all industry applications.

Industries

Plant & Control Instuments

PCI manufactures and distributes a wide range of Process and Instrument Control products for use across a wide range of industrial sectors. It has in stock a complete range of valve, fittings and instrumentation that cover most applications, however it also sources according to requirements from a worldwide network of tier one suppliers. PCI started out supplying the Oil and Gas Industry, being centrally located to a refinery, it has branched out over the years supplying Abattoirs, Bulk Terminals, Water & Waste Water Industry, Dairies & Food Processing Industry as well as general Industrial Processes.

CONTACT US

Solenoid Valves

Solenoid valves are used widely within the meat processing industry and vary according to the application. PCI has a wide range in both differential and zero differential to suit with the most common supplied being stainless steel differential solenoid valve. These are used as isolation valves mainly on hot water. These valves can handle pressure up to 16 Bar and are watermark approved so are ideal for mains water processing.

SEE MORE

Stainless Steel Push Fit Fittings

Stainless Steel Push Fit Fittings are very widely used within meat processing plants. PCI has a full range of 316 Stainless Steel push fits that cover metric tube sizes from 4mm to 12mm. They feature a FKM oring allowing for a wider range of media and contaminants within the air usually found within the meat processing areas.

SEE MORE

Stainless Threaded Fittings

Most threaded fittings used within the meat processing industry are stainless steel so they can withstand a caustic washdown. PCI has a full range of BSP & NPT threaded fittings to suit this application.

SEE MORE

Pressure Gauges

Pressure Gauges are very widely used within an abattoir and PCI has a large range for all options. The most common types are a Stainless Steel bottom & rear entry which are available in 40mm, 63mm 100mm & 150mm dial size. Safety Pattern gauges are also used on the higher pressure processing lines which feature a solid front baffle and full blow out back. Other products such as pigtail syphons and diaphragm seals to protect the pressure gauges are also available.

SEE MORE

Gaskets

PCI supplies a range of gaskets to Abattoirs. Most commonly these are either tanged graphite for high temperature applications or expanded PTFE due to its wide range of media compatibility. Both gaskets can be cut to our maximum bed size which is 4m x 2m or sheet size (whichever is smaller). These are available with quick turnaround so can be used in breakdown situations.

SEE MORE

Steam

Steam is very widely used in abattoirs and PCI has a wide range of steam valves to suit. These include Steam Traps (free float, float, bucket & thermo dynamic), Pressure Reducing Valves, Steam Seperators, Globe Valves, Isolating Valves and much more.

SEE MORE

Contact Us

Complete this form to email us your enquiry.

 

.